Geekvape Aegis Boost Kit Review: the Most Versatile AIO System

Author: Alisa Yin / Category: Review / Published: Jan-16-2020

The Geekvape Aegis Boost is the first AIO pod mod by popular manufacturer Geekvape. Geekvape has enjoyed success with its indestructible yet comfortable box mods and the best rebuildables. Now they have started doing pod-based vape devices and using the very popular Aegis lineage in the structural design.

The Geekvape Aegis Boost is a lightweight and rugged AIO rated for 40W, which combines the portable size of a pod and the capability of a box mod. It is streamlined and aesthetically pleasing. The Geekvape Aegis Boost is driven by a 1500mAh internal battery and holds up to 3.7ml e-juice (2ml for TPD Edition). It unitizes the Kanthal 0.6 ohm mesh coil, 0.4-ohm mesh coil, and an RBA deck. The Aegis Boost Pod Cartridge is refillable and the coils are replaceable. The Geekvape Aegis Boost Pod Mod also boasts the advanced chipset, large e-liquid capacity, and the intuitive airflow control.

 

Price: £ 27.99 (at NewVaing) - TPD Edition; Discount Code: BoostKit

Color: Space Black, Devil Red, Almighty Blue, Aura Glow, Gunmetal

Geekvape Aegis Boost Pod Mod Kit Specifications

  • Dimensions 106.8 mm x 27.7 mm x 39.2 mm
  • Tank capacity: 3.7ml (standard version)/2ml (TPD version)
  • Input voltage: 3.0-4.25 volts
  • Output voltage: 1.0-6.0 volts
  • Battery:1500 mAh
  • Micro-USB cable: Supports 5V/1.5A
  • Output power: 5-40 watts
  • Resistance range: 0.2-3 ohms

Geekvape Aegis Boost Pod Mod Kit Contents

  • 1 x GeekVape Aegis Boost (Pre-installed with GV Boost Coil 0.4 ohm )
  • 1 x User manual
  • 1 x GV Boost coil (0.6 ohm / 15-25 watts)
  • 1 x Micro-USB cable
  • 1 x Promotion card & warranty card
  • 1 x Coil tool
  • 1 x Drip tip

Build quality and Design of Geekvape Aegis Boost

The Geekvape Aegis Boost is pretty large for a pod system that is only a little bit smaller than the GeekVape Aegis Mini. But it is still a compact and portable vape device that measures only 106.8mm by 39.2mm by 27.7mm and weighs 120 grams. The Zinc-Alloy chassis with the faux leather sleeve looks attractive and fits comfortably in your hand. The Geekvape Aegis Boost features the ergonomic shape, rubberized finish and IP67 dust and water resistance, which are the same with the rest devices of the Aegis family. The build quality is top-notch as its predecessors. If you haven't owned an Aegis device before, the quality of the Aegis Boost will be impressive.

The built-in 1500mAh battery offers almost 36 hours of vaping time, the output ranges from 5 to 40W. That can be adjusted by the two adjustment buttons on the front. The small black and white screen is bright and easy to read, which displays your vaping data like a puff counter, coil resistance, and wattage. It is a button-activated vape device, and five clicks of the fire button will turn it on and off. The GeekVape also boasts a remarkable firing speed of 0.08s due to its advanced AS Chipset that maximizes the power efficiency and performance. The 3.7ml e-liquid capacity (2ml for TPD Edition) PTGC pod cartridge features a replaceable plug ‘N’ play coil system. The GeekVape Aegis Boost starter kit comes with the 0.6 ohm KA1 mesh, which features the excellent flavor with a minor cloud.


The Pod Cartridge of the GeekVape Aegis Boost

The GeekVape Aegis Boost kit only comes with one refillable pod. The tank with a dust cap on the top protects the mouthpiece. There are two different style drip tips in the box, a wide bore one for DL vaping and a round one for MTL vaping. The airflow dial on the front is fully adjustable that allows from DL vape to an MTL vape. The rubber fill plug on the top allows you to refill your favorite e-liquid without removing the pod. The fill hole is large enough for any size of the bottles. But the rubber plug is a little bit hard to remove. If you want to remove the pod, just push the release button on the back. Then the pod will pop out instantly. That’s very convenient and easy to use.

How to Fill the GeekVape Aegis Boost Pod

The GeekVape Aegis Boost pod is made of dark plastic which makes the juice levels hard to see. Please make sure you are in a nice light place.

  • Remove the silicon plug at the top of the pod
  • Fill with your favorite e-liquid
  • Close the silicone plug tightly and allow the coil to get fully saturated for at least 3min

Warm Prompt: I recommend you to prime your coils with a few drops of the juice when using for the first time. That can help to avoid the dry hit or burning the coil.


Coils of the GeekVape Aegis Boost

The GeekVape Aegis Boost comes with 2 coil heads in the box. The 0.6 ohm KA1 Mesh coil is pre-installed and rated for 15 - 25W; the 0.4-ohm Mesh Coil is rated for 25 - 33W. The RBA deck is available for the GeekVape Aegis Boost and sold separately.

The 0.4-ohm Mesh Coil performs well for both flavor and vapor production. When at 27W with fully open airflow, the vape experience is really good. The 0.6-ohm Mesh Coil is similar to the 0.4 ohm Coil in performance. The flavor and the coil life are well. The vapor production is decent, not a huge cloud chucker. The GeekVape Aegis Boost is really a versatile vape device for MTL vaping as well as low-wattage DL vaping.

The GeekVape Aegis Boost Mesh Coils are push-fit coils, which are simple to install at the bottom of the pod. The rubber plug is hard to remove unless you have strong nails. You can utilize the coil-removal tool in the kit when replacing the coil. You can enjoy an MTL vape with either of the coils due to the fully adjustable airflow.


Battery Life and Charging of the GeekVape Aegis Boost

The GeekVape Aegis Boost is driven by an internal 1500mAh battery and the battery life is really good especially when using the 0.6-ohm coil at 12W. If you use the 0.4-ohm mesh coil with wattage around 28 - 33W, you will get 150 - 200 puffs. If you use the 0.6-ohm mesh coil at 20W, you will get approx 300 - 350 puffs. The GeekVape Aegis Boost also has a full meter on the screen like a regular mod.

The charging port is at the side behind the rubber plug with a 1.5A charging rate. It will just take 75min for a full charge. The pass-thru vaping feature allows you to vape while charging. The device will pause charging when you vape and resumes when you stop firing it.


GeekVape Aegis Boost Pod Mod Kit Review

The GeekVape Aegis Boost Pod Mod kit features the fully adjustable airflow control making it the top class AIO system in 2019. It brings you the best flavor for both DL and MTL vaping. The Aegis Boost also inherits the IP67 waterproof, dust-proof and shockproof features from the Aegis series, making it the most solid and sturdy pod device on the market. There are also some drawbacks. The pod could be a little lighter, as its dark plastic is hard to view the juice level.

Pros and Cons of the GeekVape Aegis Boost Pod Mod Kit

Pros:
Zinc alloy chassis for solid quality and attractive appearance
Leather sleeve with a sleek edge for nice hand feeling
Compact and lightweight for easy carry
Two coil options are included in the box
Refillable pods with replaceable coils
Fully adjustable airflow design for MTL and DTL vaping
IP67 rated dustproof and waterproof, shockproof
The excellent flavor from coils, good coil life
1.5A fast USB charging, 75min for a full charge
1500mAh large battery for an entire day vape with moderate use
Fullscreen for wattage, puff counter, and battery meter
Fully adjustable output
Pass-thru vaping
Cons:
The dark-tinted plastic pod makes juice level hard to see
The rubber plug is hard to remove
Airflow control feels a little bit lose
DTL drip tip rotates freely and easily
Slightly overstated battery size (closer to 1400 mAh)
The battery does not last long when the wattage is over 28W


GeekVape Aegis Boost vs VOOPOO VINCI vs SMOK RPM40

The GeekVape Aegis Boost and the SMOK RPM40 and the VOOPOO VINCI are the similar pod system with 1500mAh battery but feature the different vaping experience. Here we compare the 3 pod kit for your reference.

Features Geekvape Aegis Boost VOOPOO VINCI SMOK RPM40

Chipset

AS Chipset

GENE.AI

IQ-R

Airflow Adjustment

1 Way

2 Ways

1 Way

View Juice Level

Yes

Yes

No

Adjust the work modes

Not supported

Supported

Not supported

Compatible Coil

Battery

1500mAh

1500mAh

1500mAh

Display

0.42in OLED Screen

0.96″ TFT color screen

0.96″ TFT color screen

Special Performance

IP67 Water resistant, Stain resistant, Corrosion resistant and Tear resistant

PUFF curve will records vaping habits for 2 weeks

Record puff number

Charge

Micro USB charging up to 1.5A rate

5V/1A;Fully charge 1.5h

Fast micro usb charge; Fully charge 2h

Output Wattage

5-40W

5-40W

1-40 W


Verdict

The GeekVape Aegis Boost Pod Mod Kit is a versatile and portable vape device that provides the MTL and DTL vaping thanks to its fully adjustable airflow control. The 0.4-ohm and 0.6-ohm mesh coils are both excellent on flavor and vapor production. The body is solid and strong with shockproof, waterproof and dustproof design. It fits comfortably in your hands and can be carried easily. The 1500mAh internal battery is powerful and can last a full day. The charging speed is pretty fast.

Overall, the GeekVape Aegis Boost is one of the best pod systems on the market, as it genuinely delivers everything you expect from this type of kit. The performance is really impressive. If you don’t want just a basic level AIO, the GeekVape Aegis Boost Pod Mod Kit is worth trying!

Leave a comment

All comments are moderated before being published