![[2020 Newest] OXVA Origin X Pod Mod Kit Review - A Triple AIO System for All Vapers](http://www.newvaping.com/cdn/shop/articles/oxva-origin-x-1_{width}x.png?v=1599710479)
QUICK LINKS
- Specifications
- Package Contents
- Build Quality and Design
- Pod Cartridge and Coils
- Performance
- Battery Life
- Review
- Pros and Cons
- Q & A
The OXVA Origin X Pod Mod Kit is a compact AIO pod system. It is built for both MTL and DTL vaping. The OXVA Origin X Pod Mod Kit uses a single 18650 rechargeable battery with a maximal wattage up to 60W. You can recharge it via the Type-C charging cable. If you enjoy coil building, the OXVA Origin X Pod Mod Kit has a rebuildable coil for you, they also have a rebuildable RDTA section for you to put in either bigger coils or dual coils.
Price: £ 39.99 (at Newvaping)
Colours: Black & Red Trim, Black Carbon Fiber, Marble Gray, Pine green.
OXVA Origin X Pod Mod Kit Specifications:
Dimensions: 102.9mm x 34.5mm x 25mm
Pod capacity: 3ml(standard) / 2ml(TPD)
Single High-Amp 18650 Battery - Not Included
Wattage Output Range: 5-60W
Voltage Output Range: 3.3-3.7V
Resistance Range: 0.15-2.0ohm
Zinc-Alloy Chassis Construction
0.69" OLED Display Screen
0.2ohm UNI Mesh Coil - rated for 55-60W
1.0ohm UNI KA Coil - rated for 10-15W
OXVA Origin X Pod Mod Kit Package Contents:
1 x Origin X Pod Mod
1 x Origin X Pod
1 x 0.2Ω UNI Mesh Coil
1 x 1.0Ω UNI Mesh Coil
1 x Type-C Charging Cable
1 x Airflow Ring
1 x User Manual
Build Quality and Design of OXVA Origin X Pod Mod Kit
The OXVA Origin X Pod Mod Kit stands at approximately 102.9mm x 34.5mm x 25mm, it looks very similar to the Origin, which is compact and portable. The ergonomic design and style fits the palm properly and is simple to carry. It's driven by a single 18650 battery, you can use the included battery ribbon remove the battery. The battery door never comes off unexpectedly during my test. What differs from the Origin is that the charging port is located on the base now, you have to lie it down to get it charged. The screen shows basic information including Wattage, resistance, battery and puff counter. You can press and hold both buttons to reset the puff counter.
The OXVA Origin X Pod retains 2ml of e-liquid in TPD version and is made from clear PCTG. It features large mouthpiece and possesses a bottom filling interface with a rubber plug. The OXVA Origin X Pod comes with two coils for both DTL and MTL vaping- 0.2Ω UNI Mesh Coil and 1.0Ω UNI Mesh Coil.
The OXVA Origin X is a Triple system for all vapers: As a starter, you can use it as an AIO pod system with original pod; If you're an advanced vaper, you can pair it with the RBA tank; With a 510 connecter, you can turn it into a mod kit, you can go up to 24mm without really worrying about overhang!
How to Fill the OXVA Origin X Pod:
Remove the pod from OXVA Origin X and pull out the silicone stopper, fill the e-liquid into the small hole from the bottom with you preferred e-liquid. It’s recommended to use small bottles because the hole is quite small.
There’s only one hole to fill the e-liquids and no other holes to allow air to escape, so be careful when you fill the pod.
Performance of OXVA Origin X Pod Mod Kit
The OXVA Origin X Pod Mod Kit is a lightweight and solid product with two simple buttons. It features button-activated design, you can press the fire button to have a draw. You can click the fire button five times to set it on/off or press it three times to lock it. Below the screen is the wattage adjustment button, it can change up from 5W to 60W.
0.2ohm UNI Mesh Coil - rated for 55-60W
The 0.2ohm UNI Mesh Coil's airflow ring is all open, which gives a really good DTL vape. This coil is suitable for low nicotine and high VG e-liquids. Coil life, as well as the flavour and cloud, is impressive.
1.0ohm UNI KA Coil - rated for 10-15W
The draw of 1.0ohm UNI KA Coil is tight and the maximum wattage is 15W. This coil is suitable for high nicotine and high PG e-liquids. You will get a limited cloud with pretty nice flavour. It’s an impressive MTL draw for me.
Oxva Origin X Battery Life
The battery life can be affected by different factors. I get around 160 draws with the 0.2-ohm coil at the wattage of 50W. I think it performs really nice as for a single 18650 battery. I can use it all day without recharging.
OXVA Origin X Pod Mod Kit Review
The OXVA Origin X Pod Mod Kit is a compact and functional product. The flavour and vapor creation are excellent. If you are considering to get a light in weight and ergonomic device, I'll recommend you to try the OXVA Origin X. What is your opinion on the OXVA Origin X Pod Mod Kit? I want to know by your comment!
Pros and Cons of OXVA Origin X Pod Mod Kit
Pros:
- Great cloud and flavour
- A true AIO device
- Good battery life
- Triple system for all vapers
- Well build and good design
- Adjustable Airflow Top Cap
- Portable and user-friendly
- Well build and good design
- Support both MTL and DTL vaping
Cons:
- The charging port is on the base
- The filling hole is a little small
- Only one filling hole
- Useful DIY accessories not included
- The 510 pin isn’t spring-loaded
Q & A
- What’s the pod system?
Instead of using the tank like the mod kits, a pod system is a small vape comes with pod cartridge to hold the e-liquids. This cartridge snaps into a small battery to power the device.
- What's the difference between Podsystem and mod kits?
Many mod kits are designed for sub-ohm vaping, so they are usually used with a higher VG e-liquid. Pod systems are best used with nic salt e-liquids.
- What age can you start vaping?
The legal age in most countries to buy e-cigarettes is 18, but online stores don't always ask for proof of age.
- How much are vape kits?
Vape kits range in price from $15 to $100. At the low end, you will find the relatively simple vape pens and pod systems which are great for beginners.
- Is Pod system better than mod kits?
Pod systems offer many advantages over other mod kits, such as convenience, portable and user-friendly. If you are an advanced vaper and enjoy better vapour and personal settings, then mod kits are better for you.