- Package Contents
- Build Quality and Design
- Pod Cartridge and Coils
- Get Started
- Battery Life
- Pros and Cons
- Q & A
The Vandy Vape Kylin M AIO Pod Kit is a true rebuildable AIO Designed for both DIY and pre-built coil. The Vandy Vape Kylin M AIO Pod Kit uses single 18650 rechargeable battery with a maximal wattage up to 70W. It has 5ML juice capacity designed for rebuildable atomizer and 2.5ML for the pre-built coil. You can recharge it via the TYPE-C charging cable.
Price: £59.99 (at Newvaping)
Colours: Silver moonlight, Fantasy forest, Wormhole, Polar phantom
Vandy Vape Kylin M AIO Pod Kit Specifications:
Size: 100mm x 46.5mm x 24.5
Pod Capacity: 5ml(standard) / 2ml(TPD)
Output Power: 5W – 70W
Battery: 1 x 18650 (not included)
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-5.5V
Charging Input Current: 1500mAh
Operating Mode: VW/VV/TCSS
Maximum Output Current Protection: ＜30A
Capacity: 2mL Rebuildable, 2mL Pre-Built Coils
Coil: M Coil 0.3 Ohms (35W – 45W) Single Meshed
Vandy Vape Kylin M AIO Pod Kit Package Contents:
1 x Kylin M AIO Device
1 x Kylin M AIO DIY Pod(5ml)
1 x Kylin M AIO Pod(2.5ml)
1 x Kylin M AIO Coil 0.3Ω
1 x A1 M Pre-built Wire 0.2Ω-VPC.0019
1 x SS316L M Pre-built Wire 0.15Ω(TC)-VPC.0021
1 x Dual M Pre-built Wire 0.15Ω-VPC.0022
1 x Ni80 M Pre-built Wire 0.15Ω-VPC.0023
1 x Triple Fused Clapton Pre-built Wire 0.23Ω
1 x M Wire Rod
1 x Lead Guide
2 x Cotton Lace
1 x Accessory bag
5 x Steel Wires
1 x Wire-heating tool
1 x Proper user guidance
1 x Instructional Manual
1 x QC TYPE-C Cable
Build Quality and Design of Vandy Vape Kylin M AIO Pod Kit
The Vandy Vape Kylin M AIO Pod Kit stands at approximately 100mm x 46.5mm x 24.5, it is compact and kind of heavy for its size. The square style fits the palm properly and is simple to carry. The body of Vandy Vape Kylin M AIO Pod Kit is manufactured out of Zinc Alloy that gives durability. The finishes are interesting with a sort of holographic effect. The black and white screen is small and easy enough to read with a waterproof PCBA board, it shows you the wattage, resistance, voltage, temperature and battery level of the device.
The pod can snap in and out the device and seated tightly at an angle, no magnets needed. You will find a vertical window to monitor your juice levels. There is no or rattle or movement. The drip tip is nice and comfortable to inhale.
Vandy Vape Kylin M AIO Pod Cartridge and Coils
The Vandy Vape Kylin M AIO Pod features ergonomic mouthpiece and uses side filling interface with a rubber plug. The produce and effectiveness of pod is very superb. The Vandy Vape Kylin M AIO comes with two pods -5ml RBA Pod and 2.5ml Pre-built Pod.
How to Replace the Vandy Vape Kylin M AIO Pod:
Push the pod out from the top and you can pull it out in your direction. You can lift it out when it’s about 45-degree angle. To change the pre-built coil, pull it right out of the bottom and unscrew it from the base. Screw the brand new coil onto the base and push it back to the pod.
If you’re going to utilize the pod with the RBA head, you need to use the enclosed tool so that you can dry fire your coil to find the hot spots out. It’s just a little plastic tool that you placed on the pod before you push it in. If you don’t put the tool on, the pod won't make a connection and it won't fire. After that, you can use the plastic tool to pull the pod out of the device and never have to push on the deck and screw up your build.
Get Started: Vandy Vape Kylin M AIO Kit
The adjustments for the device are as follows:
- Clicks five times to turn on/off
- Click three times to change modes
- Click the up/down to change settings like wattage, temperature
- Click the fire button and down button at the same time to flip the screen
- Click the fire button and up button at the same time to lock
Performance of Vandy Vape Kylin M AIO Pod Kit
The Vandy Vape Kylin M AIO Pod Kit is a lightweight and solid product. With a single 18650 rechargeable battery, you will find an outstanding wattage of 70W. It features button-activated design, you can press the fire button to have a draw. The utilization of Vandy Vape Kylin M AIO Pod Kit is really straightforward and basic for beginners.
The 0.3-ohm mesh coil gives you a restricted DL draw with good flavor. This coil is suitable for low nicotine. The airflow is smooth and you can set it down to one row of holes to get an MTL draw.
As for RBA, the cloud is neither warm nor great throat hit, not as much as you’d get from a mesh RDA. It gets burnt hits when I turn up higher.
Vandy Vape Kylin M AIO Pod Kit Battery Life
The Vandy Vape Kylin M AIO Pod Kit is driven by an external 18650 battery that resides behind the panel, it can be removed by pulling the battery strap. The USB charge port is type-C and includes a maximum charge rate of 1.5 amps. The battery meter will flash to show that it's charging when the device is on. When the device is off, it'll show both a battery meter and battery level. In addition, it does pass-through charging, therefore you can use these devices while it charges.
I get great battery life while with a single fused Clapton coil at 45 watts. I change the battery after four days using. Of course, this will change according to battery type, coil type, and usage frequency.
Vandy Vape Kylin M AIO Pod Kit Review
The Vandy Vape Kylin M AIO Pod Kit is a compact and simple product. The flavour and vapor creation are excellent. If you are considering to get a lightweight and ergonomic device, I'll recommend you to try the Vandy Vape Kylin M AIO Pod Kit. What is your opinion on the Vandy Vape Kylin M AIO Pod Kit? I want to know by your comment!
Pros and Cons of Vandy Vape Kylin M AIO Pod Kit
- Nice flavor
- No leaking
- Easy to build RBA deck
- Included RBA tool
- Three build options
- Airflow is smooth
- Waterproof PCB
- Various modes
- 510 drip tipis replaceable
- Easy to replace pods and coils
- Compatible with pre-built coils and DIY coils
- Not a good MTL experience
- Hard to see battery polarity
- Not very satisfied with coils
- No personal setting for coils in TC mode
- Don’t like the branding on the side
Q & A
- What do coils do in a vape?
The vape coil is the unit responsible for heating up the e-liquid and vapourising it.
- How long does a coil last in a vape?
A new coil should last between one to two weeks.
- Is Pod system better than mod kits?
Pod systems offer many advantages over other mod kits, such as convenience, portable and user-friendly. If you are an advanced vaper and enjoy better vapour and personal settings, then mod kits are better for you.
- How much is the pod system?
Vape starter kits range in price from $15 to $80. You will find the relatively simple pod systems with different budget.
- What age can you start vaping?
The legal age in most countries to buy e-cigarettes is 18, but online stores don't always ask for proof of age.