Squonk Mod

Squonking is a vaping technique that employs the Squonk mod and a bottom-feed rebuildable drip atomizer. You may continue vaping by pushing the squeezable e-juice bottle on the cotton to soak it in e-juice.

These new squonk mods meet the demands of every vaper, especially those searching for an all-in-one solution for RTAs and RDAs.

Large capacity bottles incorporated within squonk modifications eliminate the need to carry different e-juice bottles throughout the day.

So, let's take a closer look at the Squonk mod and discover if this ground-breaking device is suited for you.

What Exactly Are Squonk Mods?

While the name may sound strange, the squonk mod is one of the most intriguing products on the market.

The squonk mod is a portable gadget that can store and deliver e-juice while also giving a rebuildable coil's hit. It delivers e-juice to the cotton through a small tube from a squeezable container.

Squonk mods are classified into two types: regulated squonk mods and unregulated squonk mods.

The former is completely equipped with VW/VV chipsets. It allows customers to select the exact wattage with which they want to vape. These are the most secure solutions.

Depending on the resistance of the setup, the unregulated squonkers supply the atomizers with the raw power of the battery.

Users have to build as per the batteries’ safety limits using Ohm’s law.

Types of Squonk Mods

You've probably heard of unregulated and regulated mods, but there are other kinds of squonk mods as well. Semi-regulated mods use direct power from the battery but include chips that provide safety features like on/off, short circuit protection, and more.

These devices limit the maximum wattage that can be output. The fully regulated devices are appealing to all vapers since they offer personalization, safety, and ease of use.

In reality, these acclimate vapers to having digital displays, fine-tuning settings, and checking battery life.

If you don’t have experience with unregulated devices’ safety measures, the regulated squonk mod is your best option.

How Does A Mod Work?

A squonk mod is a vaping gadget that has an e-juice bottle within its housing.

The squeeze bottle, which is linked to the tube, flows up into the 510 connection and to the 510-center pin.

The e-juice will travel after the controlled squonk mod is applied.

It passes via the mod's 510 connection and into the RDA's male 510 connector before reaching the deck. When it comes to squanks, you no longer need to wonder how a mod works.

What Is Squonking?

Rebuildable dripping atomizers with bottom feed pins are utilized. This ensures that you receive the greatest flavor and vapor.

You cannot use an RDA with any 510 connection unless it has been modified or supplied with a suitable bottom feed pin. The reason for this is that there is no mechanism to feed juice from the mod to the atomizer.

Similarly, you don't have to use an RDA with a bottom feed pin on the basic mod. The juice will primarily drop down via the bottom feed pin. This can lead to major problems with the squonk mod kit.

Here’s a short process to explain how to squonk properly.

  1. Squeeze the bottle lightly till the e-juice fills the RDA. The wicks at the bottom of the coils will be wetted as a result of this.
  2. Then, release the bottle and allow it to return to its natural shape. The suction created will suck any remaining e-juice in the RDA back into the bottle. Only the vaped e-juice will stay in the RDA and wet the wick.
  3. Begin vaping until you notice the flavor fading, then gently press the bottle again. It varies on the intensity of the pull and the power of the coil setup, but it should offer three to six puffs.

Leave a comment

All comments are moderated before being published